Engine repair service near Abington, MA

I just had the clutch repaired on my 1974 MG Midget at Ron's transmission. He took the time to figure out the exact problem, ordered the correct parts and fixed the issue without a full clutch rebuild/replace. I was thrilled with his expert analysis of the situation to repair my car without pulling the engine, which would have been an expensive procedure. Ron and Paula provided quality service at a reasonable price, and I would certainly return.

I started going to Kevin's years ago on the recommendation of my former repair guy, who retired. All I asked for was a good mechanic who was fair and trustworthy (a lot to ask for these days, eh?) Kevin fits the bill on all the requirements. He works his butt off to get jobs done on time and charges very fair prices. Even more importantly, he stands by his work. I highly recommend Kevin's Auto Service.

Replaced my alternator, i was stuck on the side of the road and gideon came and jumped my car and replaced the alternator at an affordable rate, timely manner, and warrantied his work. Highly recommend.

Brought my car in a few weeks ago for its 60k checkup. Russ and Brian were helpful as always. It's running as well as it did when I first bought it.

On 11/13/2012 I dropped of my 2003 Ford Escape to Cape Auto Body & Service in Plymouth, MA to diagnose two cylinders that were skipping. Although I do 99% of my own mechanical work, I have been using this company for probably close to 15 years on the rare occasion I do need an outside service company. On 11/14 Cape Auto called and told me when the job was complete. They also told me my valve cover gaskets were leaking and needed to be replaced. I got the vehicle back on the 14th and worked on it myself on the next day to replace these gaskets. In doing so, I found the threads stripped for the #4 cylinder spark plug. I called Jim, one of the service managers, and he denied that they even touched this cylinder. Now for some background. First, I am certified for numerous brands of engines ranging from air cooled small engines to diesel engines rated at excess of 1,000 horsepower. I personally changed the spark plugs in this engine on Oct. 3, 2012 and torqued them as I always do for plugs going into an aluminum head. Usually when removing plugs set in my engines, I can easily do this with a 3/8” drive ratchet. When I needed to remove the “only two plugs” Cape Auto replaced, I needed to use my 1/2” drive ratchet because they were way over torqued!!! Jim claims that he worked with the mechanic on my engine the entire time and that the mechanic never touched any other plug except the two new ones. As I previously mentioned, I have been using this company for many years and have observed Jim (and the other service managers) these times I've visited. They do NOT hover over their mechanics doing their work. As a matter of fact, the desks they work at face the opposite wall of the service garage giving them no possibility of seeing the actual work being done unless they physically stand over their mechanic's shoulders. And, if Jim had been watching his mechanic closely, how did he let him/her over torque the “only two” spark plugs they claimed to have touched??? At this

Went into the shop thinking my car was going to be very expensive to fix because of terrible sound in the rear. Put me at ease when he diagnosed the issue and was quick cheap fix. Very honest guy Fran is. Highly recommended.