Daewoo service near Lewisville, TX

First off, let me give a thanks to Sabien and the rest of the staff at Standard Gear and Transmission! The service was awesome, and the results are incredible! Hopefully my experience will help others with the Cummins / G56 drivetrain. My throwout bearing was making noise for some time, and I continued to drive the truck, as it is my daily driver. Long story short, this destroyed my clutch fork, input shaft, and input bearing. I was on the fence for some time about doing away with the stock dual-mass flywheel and clutch. Sabien recommended a South Bend Clutch OFEK kit, and let me say, it is amazing! The engagement is similar to stock, but very positive. It does not grab, and shifts are silky smooth. The trans was refilled with 30 wt synchromesh, and it now runs smoother and quieter than I ever believed a G56 could. Pedal effort with the new hydraulics is so light that I nearly pushed the pedal through the floorboard when I started the truck for the first time. Gone are the truck's tendency to buck and jerk in reverse, and the noises from the factory clutch. I'm literally having to learn to drive the truck again, as it's manners and sounds are like new. I would HIGHLY recommend this clutch! Thanks again to Standard Trans. And Gear! Josh H. Fort Worth, TX

My car was making a real odd noise and I thought my ac was going bad. I took it to Eagle Transmission in Mesquite. They were able to quickly diagnose that my belt tension-er was the problem. They fixed it promptly and got me back on the road for a lot cheaper than I expected. My car has been running fine ever since. Thanks you so very much.