Auto repair service near Chino, CA

There are 1200 auto repair shops near you in Chino, CA

AzTex Trailers

4.0(1)

·

7:00 AM - 5:00 PM

17795 Foothill Blvd, Fontana

When first purchased, this 8-1/2 x 24 (+4' tongue), 9,990# GVWR enclosed car trailer was towed from the lot in CA to north ID. Went back for another load, Az-Tex caulked the space overlooked between the wheel wells and the floor. No charge. Put a piece of house roof L-edging under trim over lip over back door to stop water from roof running around the lip and running inside the ramp door. Have hauled a 1T pickup over 500 miles. Never have had any problem with this trailer. After about 10,000 miles it still has 2 of the original cheapo Chinese tires. As it is a 3x3500# axle it is really hard on the tires if it has to be towed around street corners and driveways very much. But 3 axle rides really smoothly. Cheaply built of mostly Chinese parts and materials. Welds sloppy in areas but none have ever broken. THIN aluminum skin is glued on, no screws or rivets. A couple of sheets were rippled and coming loose. Az-Tex replaced them no charge. The 5,000# floor rings really should be attached better. The screws are too small and self-thread into thin steel welded between floor joists. Main frame is box beams; tongue is channel. Hitch coupler 2-5/16" very good self-latching design. Would never open even if no lock pin was put in. This is a great value in a cheap "good enough" trailer. Doesn't compare with a premium brand like Wells Cargo or U-Haul but cost 1/3 as much! 4 brakes on front & back axles, middle axle no brakes, no brake mounting flanges on the axle. Chinese brakes. Chinese e-z lube hubs. Brakes are strong and will pull both the trailer, the tow vehicle (1T) and 1T PU inside trailer w/o using tow vehicle brakes! Take care on slick roads pulling a heavily loaded trailer with a PU with empty bed. The long WB of the trailer makes it want to go straight. It can drag the back tires of your PU sideways on a sharp turn! When I had it loaded to 9,900# on the axles and 2,000# (ODOT scales) on the hitch I jacked the centers of all of the axles up to bend them to give a little positive camber for better tracking and more even tire wear. Straight axles will sag when heavily loaded, letting the wheels do negative camber (splayed out at the bottom). Lifting with a garage jack from behind also bent the axles back toward the rear of the trailer just a little, giving a little toe-in for better stability. This big trailer when heavily loaded really should have a weight distributing hitch set. Never noticed needing antisway, though. I used an EZ-Lift with 1,000# spring bars. Straight pulling levers weight off the front wheels of your tow vehicle, making skidding more likely especially on slick roads. Maybe OK when pulling an empty trailer but when loaded it really needs the WD hitch.

Auto Worx

Auto Worx

3.0(2)

·

Closed

17052 Foothill Blvd Suite A, Fontana

Overpriced with a "can't tell me sh*t" attitude. Maybe their great on old cars but as for my wife's 2010 Challenger they caused more issues then fixed and charged me 1/3 more then anywhere else to do it. Brought my car in for springs, struts, alignment and to go through and make sure everything was right. Did a motor swap and the shop before didn't tighten the lock nuts on my adjustable suspension so wanted it all gone over. Guy was mouthy from the start and bitched about the job the whole time. My front ball joints we're missing a lock plate (found out later), really obvious but they didn't say anything and put it back together anyway. Also missed my rear craddle bushings went bad even after bringing it back to them. This is a huge issue and made the car unsafe to drive, they said it was all good though. I call back and kind of question their knowledge since these basic and obvious issues were missed to which I was hung up on. My advice, find another shop and save yourself the agony.

Auto Service Excellence (ASE) certification

A & Z Auto Repair

0.0(0)

·

Closed

8459 Cherry Ave, Fontana

Padilla Tire

0.0(0)

·

Closed

15808 Foothill Blvd, Fontana

R and B Auto Center

0.0(0)

·

Closed

16020 Foothill Blvd, Fontana

M G Transmission

0.0(0)

·

Closed

16510 Ceres Ave, Fontana

E & S Auto Repair Inc

0.0(0)

·

Closed

9530 Sierra Ave Ste 9, Fontana

Concord Auto Service and Tires

0.0(0)

·

Closed

9340 Sierra Ave, Fontana

Ace Motorsport

0.0(0)
9161 Sierra Avenue, # 115, Fontana

Mikeola Mobile Service

0.0(0)
6125 Cooper Ave, Fontana

The Radiator Man

0.0(0)
17052 Foothill Boulevard, Fontana

Euro Automotive Group

0.0(0)
17946 Foothill Blvd, Fontana
All Tune and Lube

All Tune and Lube

5.0(2)

·

9:00 AM - 4:00 PM

521 W. Imperial Hwy, La Habra

Very helpful, knowledgeable and accommodating. They should change their name because they do much more than just tuneups and lube jobs. And, as a bonus, they are quick and friendly. One of the employees even offered to give me a ride there and back when my car had to be kept for a few days.

Auto Service Excellence (ASE) certification
AAA Approved certification

Autoland

0.0(0)
700 N Harbor Blvd, La Habra

Global Motors

0.0(0)
1020 E Whittier Blvd, La Habra

LA Habra Motor Inc

0.0(0)
980 E Whittier Blvd, La Habra

BURCH Ford

0.0(0)
201 N Harbor Blvd, La Habra

California Cars

0.0(0)
860 E La Habra Blvd, La Habra

JL Motorworks

0.0(0)

·

Closed

420 East Whittier Boulevard, La Habra

Tom Long Enterprises

0.0(0)
700 E Lambert Rd, La Habra

La Habra Foreign Car Service

0.0(0)

·

Closed

230 East La Habra Boulevard, La Habra

California Auto Center

0.0(0)

·

Closed

411 E Lambert Rd, La Habra

High Tech Foreign Auto Care

0.0(0)

·

Closed

441 E. Imperial Hwy Suite D, La Habra

Imperial Auto

0.0(0)
421 E Imperial Hwy, La Habra

Quick Smog Inc

0.0(0)

·

Closed

621 West Whittier Boulevard Unit A, La Habra

Family-owned and operated Smog Station serving Orange County since 1996.Services we provide include:• All Smog Tests: STAR, Test-Only, Regular, Test & Repair• All Vehicles: Cars, RVs, Trucks, Limos, Fleets* & Gross Polluters• Smog Repairs• Brake & Lamp Inspections• Diesel Vehicle Inspections• CAP Repairs• SERVICES IMMEDIATELY AVAILABLE...IN STOCK: Registration Renewals, Stickers, License Plates, Title Transfers, Temporary Driving Permits, Salvaged Titles, Out of State Titles, Motorcycles & VIN Verification. * For special Fleet pricing call: Greg Boesche @ 562.694.3878Great Customer Service• Clean/Comfortable/Cool• FREE COFFEE & SODA• Cable TV• Kid's Play Area• VISA, M/C, AMEX, DISCOVER & Checks• SE HABLA ESPAÑOL

Auto repair reviews near you

5.0

Very helpful, knowledgeable and accommodating. They should change their name because they do much more than just tuneups and lube jobs. And, as a bonus, they are quick and friendly. One of the employees even offered to give me a ride there and back when my car had to be kept for a few days.

Michael
All Tune and Lube Logo

All Tune and Lube

La Habra area

4.0

When first purchased, this 8-1/2 x 24 (+4' tongue), 9,990# GVWR enclosed car trailer was towed from the lot in CA to north ID. Went back for another load, Az-Tex caulked the space overlooked between the wheel wells and the floor. No charge. Put a piece of house roof L-edging under trim over lip over back door to stop water from roof running around the lip and running inside the ramp door. Have hauled a 1T pickup over 500 miles. Never have had any problem with this trailer. After about 10,000 miles it still has 2 of the original cheapo Chinese tires. As it is a 3x3500# axle it is really hard on the tires if it has to be towed around street corners and driveways very much. But 3 axle rides really smoothly. Cheaply built of mostly Chinese parts and materials. Welds sloppy in areas but none have ever broken. THIN aluminum skin is glued on, no screws or rivets. A couple of sheets were rippled and coming loose. Az-Tex replaced them no charge. The 5,000# floor rings really should be attached better. The screws are too small and self-thread into thin steel welded between floor joists. Main frame is box beams; tongue is channel. Hitch coupler 2-5/16" very good self-latching design. Would never open even if no lock pin was put in. This is a great value in a cheap "good enough" trailer. Doesn't compare with a premium brand like Wells Cargo or U-Haul but cost 1/3 as much! 4 brakes on front & back axles, middle axle no brakes, no brake mounting flanges on the axle. Chinese brakes. Chinese e-z lube hubs. Brakes are strong and will pull both the trailer, the tow vehicle (1T) and 1T PU inside trailer w/o using tow vehicle brakes! Take care on slick roads pulling a heavily loaded trailer with a PU with empty bed. The long WB of the trailer makes it want to go straight. It can drag the back tires of your PU sideways on a sharp turn! When I had it loaded to 9,900# on the axles and 2,000# (ODOT scales) on the hitch I jacked the centers of all of the axles up to bend them to give a little positive camber for better tracking and more even tire wear. Straight axles will sag when heavily loaded, letting the wheels do negative camber (splayed out at the bottom). Lifting with a garage jack from behind also bent the axles back toward the rear of the trailer just a little, giving a little toe-in for better stability. This big trailer when heavily loaded really should have a weight distributing hitch set. Never noticed needing antisway, though. I used an EZ-Lift with 1,000# spring bars. Straight pulling levers weight off the front wheels of your tow vehicle, making skidding more likely especially on slick roads. Maybe OK when pulling an empty trailer but when loaded it really needs the WD hitch.

Robert
AzTex Trailers Logo

AzTex Trailers

Fontana area

1.0

Overpriced with a "can't tell me sh*t" attitude. Maybe their great on old cars but as for my wife's 2010 Challenger they caused more issues then fixed and charged me 1/3 more then anywhere else to do it. Brought my car in for springs, struts, alignment and to go through and make sure everything was right. Did a motor swap and the shop before didn't tighten the lock nuts on my adjustable suspension so wanted it all gone over. Guy was mouthy from the start and bitched about the job the whole time. My front ball joints we're missing a lock plate (found out later), really obvious but they didn't say anything and put it back together anyway. Also missed my rear craddle bushings went bad even after bringing it back to them. This is a huge issue and made the car unsafe to drive, they said it was all good though. I call back and kind of question their knowledge since these basic and obvious issues were missed to which I was hung up on. My advice, find another shop and save yourself the agony.

Dan
Auto Worx Logo

Auto Worx

Fontana area